If you own a battery jump starter like the GOOLOO GT4000, it goes without saying that you must take good care of it in order to get the most out of the device. Neglecting your jump starter will cause the device to break down in a very short time. Besides, a neglected jump starter can damage your vehicle and pose serious safety hazards.
In this article, we will provide you with practical tips for a long battery jump starter life.
What Is The Expected Lifespan Of A Battery Jump Starter?
The average lifespan of a battery jump starter is generally 3 to 6 years, depending on how well you take care of the device. However, different types of jump starters have different lifespans. You’ll want to check the manufacturer’s specifications to determine the actual lifespan of your jump starter.
Modern jump starters for gas and diesel engines like GOOLOO GT4000 boast an impressive lifetime thanks to their advanced design, high capacity, and cold resistance capabilities.
Just like other devices you own, you’ll want to get the most out of your battery jump starter. There are many things you can do to maximize the lifespan of a jump starter. Keeping these steps in mind could prolong the lifespan of your jump starter by as much as two to three times longer and keep the device in good working order.
1. Use Your Battery Jump Starter Correctly
Improper jump starter use can damage the device itself and the electronic components of your car. Using your battery jump starter incorrectly can lead to issues like short circuits, overvoltage, overcurrent, and battery damage.
We recommend you respect the duty cycle of your jump starter and disconnect the device after you’ve successfully jumpstarted your vehicle. Leaving the clamps connected to the battery terminals after you’ve completed a successful jump-start can be detrimental to your jump starter’s long-term life. Make sure you follow the recommended safety procedures to protect your jump starter from damage, ensure your own safety, and the well-being of your vehicle.
It’s best to carefully read your jump starter manual as well as your vehicle’s manual on how to jump start your vehicle and follow all the guidelines and instructions from the manufacturer.
2. Keep the Battery Level Above 80%
One of the things that drastically reduce a jump starter’s lifespan is leaving the device in a discharged state for extended periods. Most people, especially those who don’t use their jump starters regularly forget about the device and stash it in the car’s trunk without bothering whether it has battery power or not. Storing your jump starter in a discharged state is one of the easiest ways to harm the device.
This is why it’s advisable to recharge the device after each use and always keep the battery level above 80%. If you don’t use your jump starter regularly, ensure you charge it every 3 months. However, you should avoid keeping your jump starter unit plugged into the wall outlet as this may shorten the battery life. Even though modern battery jump starters come with overcharging protection, keeping your device at charging cycles all the time can reduce its lifespan.
Luckily, modern jump starters like GOOLOO GT4000 come with fast charging capabilities. For instance, it only takes one hour and 12 minutes to fully charge GOOLOO GT4000 car battery charger jump starter from 0% to 100%.
3. Store Your Jump Starter in a Moderate Temperature
Just like vehicle batteries, jump starter batteries perform best at moderate temperatures. Extreme heat or cold can significantly shorten the overall battery life of your jump starter. Very low temperatures lower the speed of the electrochemical reaction in a battery, so your jump starter will continue to get weaker if it’s exposed to low storage temperatures for long. On the other hand, prolonged exposure to high temperatures can reduce a jump starter battery by 50%.
Therefore, it’s advisable to store your jump starter in a moderate temperature environment, ideally between 50˚F and 70˚F (10˚to 20˚C). Whether you own GOOLOO GT4000 or other type of battery jump starter, storing your jump starter in a moderate temperature environment can make a huge difference when it comes to the device’s lifespan.
4. Clean the Clamps
Over time, the clamps may accumulate all sorts of dirt and even become corroded due to acid contact. Corroded clamps can render your jump starter dysfunctional. It is a good practice to wipe down the clamps after every use to keep them in good condition. Simply take a wire brush, dip it in a baking soda cleaner, and scrub the clamps.
If your car battery terminals are corroded, you should clean them as well, because they’ll end up corroding the jump starter clamps and cause the device to fail.
Here’s what you’ll need to clean your car battery terminals:
- Wire brush
- Towel or cloth
- Baking soda
- Water
- Petroleum jelly
Once you’ve gathered these materials, follow these simple steps:
Step 1: Disconnect the battery cables.
Step 2: Coat the battery terminals with a teaspoon of baking soda.
Step 3: Pour a small amount of water on each terminal and let the terminals soak in the solution for a few minutes.
Step 4: Scrub the terminals with a wire brush to remove any corrosion on the terminals. Once the corrosion has been removed, rinse the terminals with cool, clean water to ensure the cleaning solution is completely washed away.
Step 5: Dry the terminals off with either a towel or soft cloth. After that, apply a generous amount of petroleum jelly on each battery terminal to prevent future corrosion.
Step 6: Reconnect battery cables
Looking For a Fast-Charging Jump Starter? Look No Further Than GOOLOO GT4000
If you’re looking for a powerful, portable, and fast-charging jump starter for gas and diesel engines, the GOOLOO GT4000 can be a good choice. The GOOLOO GT4000 battery jump starter is easy and safe to use, comes with pre-heating tech, features an advanced design, and can be used to charge smartphones, laptops, and other devices.